• Home
  • All Services
    • Home Repair
    • Installations
    • Plumbing
    • Electrical
    • Assembly
    • Carpentry
    • Maintenance
    • Heating & Cooling
    • Kitchen Remodeling
    • Bathroom
    • Flooring/Tiling
    • Painting
    • SEE ALL………….
  • All Products
    • Bath Fans
    • Ceiling Fans
    • Faucets
    • Garage Door Openers
    • Garbage disposals
    • Sump pumps
    • TV Brackets
    • Whole house furnace humidifier
    • SEE ALL………….
  • How it works
  • Blog
  • Faq
  • About Us
  • Contact Us
  • 50% Discounts
    • How it works
    • Blog
    • 50% Discounts
    View Cart
    • The cart is empty.
    • Repairs
      • Tiles Restoration, re-grouting & caulking
      • Wood Rot repair sills doors siding etc.
      • Drywall Repair & Installation
      • See All (75) Home Repairs
      • Deck Restorations stain/paint/repair
      • Doors Windows repair & adjustment
      • Broken Tiles squeaky floor subfloor repairs
    • Installations
      • Appliances dishwasher range hood water heater
      • Home Theater TV hanging movie projectors
      • Outdoor Play basketball hoop swing sets
      • See All (197) Installation Services
      • Safety & Security Grab Bars hand rails smoke detectors
      • Ventilation Projects attic/bath fans range hoods static vents
      • Locks & Hardware entry door locksets deadbolts and more
    • Plumbing
      • Garbage Disposals
      • Toilet wax ring
      • Toilets
      • See All (51) Plumbing Services
      • Toilet flush kit
      • Faucets
      • Plumbing Repairs
    • Electrical
      • Ceiling fan Install
      • Interior Lighting
      • Electrical Repairs
      • View All (34) Electrical Services
      • Outdoors Lighting
      • Whole house fan
      • Ventilation Fans
    • Assembly
      • Sports & Exercise
      • Basketball Systems
      • Indoor Furniture
      • See All (27) Assembling services
      • General Assembly
      • Garden Structures
      • Play and swing set (Small)
    • Carpentry
      • Windows Installation
      • Doors Installation
      • Wood trimming
      • See All (74) Carpentry Projects
      • Doors and Windows Repairs
      • Closet Organization
      • General Carpentry
    • Maintenance
      • Caulking
      • Pressure Washing
      • Weather-stripping
      • See All (31) Maintenance Services
      • Tuckpointing
      • Insulating
      • Gutters Cleaning
    • Bathroom
      • Bathroom Fixtures
      • Bath Ventilation
      • Bath Accessories
      • See All (44) Bathrooms Projects
      • Tiling And Flooring
      • Bath Remodeling
      • Grouting And Sealing
    • Kitchen
      • Appliances
      • Tiling and Flooring
      • Sinks
      • See All (44) Kitchen Projects
      • Faucets
      • Cabinets and Counters
      • Kitchen Lighting
    • Flooring/Tiling
      • Subfloor Repair
      • Laminate flooring
      • Ceramic Tile Flooring
      • See All (10) Flooring & Tiling
      • Shower walls tiling
      • Backsplash tiling
      • Sheet vinyl linoleum flooring
    • Painting
    • Products
      • Faucets
      • Sump Pumps
      • Garbage Disposals
      • See All Products (Products include installation)
      • Toilets
      • Ceiling Fans
      • Garage Door Openers
    Moisture & mold prevention
    25% Off

    Moisture & mold prevention

    10 point moisture & mold prevention plan : $822.92 $617.19

    Share This Deal :
    facebook twitter mail

    Includes:

    10 Point Moisture and Mold Plan Includes:

    Exterior

    1. Roof:
    Remove debris build-up in valleys and at wall-to-roof intersections.
    Remove moss and lichen growth with a moss killer, broom, or garden hose.
    Inspect flashing around chimney and penetrations. If flashing has cracked or pulled away we will provide an estimate for repairs

    2. Gutters and Downspouts:
    Clean leaves, tree dander, limbs and debris in gutters as needed, flush down spouts using a fish tape when necessary (for extra large homes, detached garages and more than 3 story high homes additional charge may apply)
    Inspect gutter joints for obvious signs of damage and provide estimate for repairs.

    3. Windows/Doors/Siding – Inspect caulking on siding joints, around windows, utility penetrations, and doors. Check that weather-stripping around doors and windows seals tightly to prevent water from entering
    Provide consultation and an estimate for caulking and or weather-stripping if needed

    Perimeter

    4. Drainage:
    Check perimeter ground slopes to make sure that they slope away from the foundation, provide cost and consultation for re-sloping if needed.
    Check downspouts dead-end near the foundation for water flow and leaks at the joints, If needed provide an estimate for adding splash blocks or water diverters to redirect water away from the foundation.

    5. Sprinklers and plants watering recommendation:
    We recommend when watering plants and lawn to make sure that you direct lawn sprinklers so they do not wet the siding, windows, or foundation walls, sprinkles spray water upwards which can easily penetrate inside of the walls creating a moisture condition that can lead to mold and rot

    6. Landscaping:
    Trim plant life away from the siding as needed.
    Provide consultation and cost for shrubs or vegetation that may need to be moved if foliage persistently contacts siding, windows, or utility penetrations such as dryer vents.

    Interior

    7. Attic:
    Check for water stains on the underside of the roof, rusted nails and discolored mildewed sections on any surface. If we find any of these moisture warning signs we will look for the source of the moisture. (These could be from water leaks or a faulty ventilation fan that is directing moist air into the attic space instead of to the outside)
    Check that vents at the eaves are unobstructed by insulation and that there is room for air to flow from the eaves (soffit vents) into the attic space and out the upper roof vents.
    After the throughout inspection we will provide consultation and cost of repairs if needed

    8. Ventilation:
    We recommend that fans run for 20 minutes after showers.
    We will inspect your bath/kitchen/laundry fan ducts and dryer vent to make sure that they venting outside and they do not leak or terminate in the attic.
    Provide consultation and cost if corrections needed

    9. Kitchen/Bath:
    Inspect plumbing fixtures, paying particular attention to areas under sinks and toilets and around shower and tub enclosures.
    Look for stains, cracks, and mold on caulk or any other surface.
    Provide consultation and cost if corrections needed

    10. Basement/Crawl space:
    Check basement and crawlspace for moisture problems such as standing water, mildew on floor joists, or rust on metal fasteners.
    Check for missing batt insulation and vapor barrier over exposed ground in crawlspace.
    If we find moisture damage or standing water in either the crawlspace or basement we will provide a consultation and a cost for repairs to eliminate the source of the moisture.

    Includes:

    10 Point Moisture and Mold Plan Includes:

    Exterior

    1. Roof:
    Remove debris build-up in valleys and at wall-to-roof intersections.
    Remove moss and lichen growth with a moss killer, broom, or garden hose.
    Inspect flashing around chimney and penetrations. If flashing has cracked or pulled away we will provide an estimate for repairs

    2. Gutters and Downspouts:
    Clean leaves, tree dander, limbs and debris in gutters as needed, flush down spouts using a fish tape when necessary (for extra large homes, detached garages and more than 3 story high homes additional charge may apply)
    Inspect gutter joints for obvious signs of damage and provide estimate for repairs.

    3. Windows/Doors/Siding – Inspect caulking on siding joints, around windows, utility penetrations, and doors. Check that weather-stripping around doors and windows seals tightly to prevent water from entering
    Provide consultation and an estimate for caulking and or weather-stripping if needed

    Perimeter

    4. Drainage:
    Check perimeter ground slopes to make sure that they slope away from the foundation, provide cost and consultation for re-sloping if needed.
    Check downspouts dead-end near the foundation for water flow and leaks at the joints, If needed provide an estimate for adding splash blocks or water diverters to redirect water away from the foundation.

    5. Sprinklers and plants watering recommendation:
    We recommend when watering plants and lawn to make sure that you direct lawn sprinklers so they do not wet the siding, windows, or foundation walls, sprinkles spray water upwards which can easily penetrate inside of the walls creating a moisture condition that can lead to mold and rot

    6. Landscaping:
    Trim plant life away from the siding as needed.
    Provide consultation and cost for shrubs or vegetation that may need to be moved if foliage persistently contacts siding, windows, or utility penetrations such as dryer vents.

    Interior

    7. Attic:
    Check for water stains on the underside of the roof, rusted nails and discolored mildewed sections on any surface. If we find any of these moisture warning signs we will look for the source of the moisture. (These could be from water leaks or a faulty ventilation fan that is directing moist air into the attic space instead of to the outside)
    Check that vents at the eaves are unobstructed by insulation and that there is room for air to flow from the eaves (soffit vents) into the attic space and out the upper roof vents.
    After the throughout inspection we will provide consultation and cost of repairs if needed

    8. Ventilation:
    We recommend that fans run for 20 minutes after showers.
    We will inspect your bath/kitchen/laundry fan ducts and dryer vent to make sure that they venting outside and they do not leak or terminate in the attic.
    Provide consultation and cost if corrections needed

    9. Kitchen/Bath:
    Inspect plumbing fixtures, paying particular attention to areas under sinks and toilets and around shower and tub enclosures.
    Look for stains, cracks, and mold on caulk or any other surface.
    Provide consultation and cost if corrections needed

    10. Basement/Crawl space:
    Check basement and crawlspace for moisture problems such as standing water, mildew on floor joists, or rust on metal fasteners.
    Check for missing batt insulation and vapor barrier over exposed ground in crawlspace.
    If we find moisture damage or standing water in either the crawlspace or basement we will provide a consultation and a cost for repairs to eliminate the source of the moisture.

    Includes:

    10 Point Moisture and Mold Plan Includes:

    Exterior

    1. Roof:
    Remove debris build-up in valleys and at wall-to-roof intersections.
    Remove moss and lichen growth with a moss killer, broom, or garden hose.
    Inspect flashing around chimney and penetrations. If flashing has cracked or pulled away we will provide an estimate for repairs

    2. Gutters and Downspouts:
    Clean leaves, tree dander, limbs and debris in gutters as needed, flush down spouts using a fish tape when necessary (for extra large homes, detached garages and more than 3 story high homes additional charge may apply)
    Inspect gutter joints for obvious signs of damage and provide estimate for repairs.

    3. Windows/Doors/Siding – Inspect caulking on siding joints, around windows, utility penetrations, and doors. Check that weather-stripping around doors and windows seals tightly to prevent water from entering
    Provide consultation and an estimate for caulking and or weather-stripping if needed

    Perimeter

    4. Drainage:
    Check perimeter ground slopes to make sure that they slope away from the foundation, provide cost and consultation for re-sloping if needed.
    Check downspouts dead-end near the foundation for water flow and leaks at the joints, If needed provide an estimate for adding splash blocks or water diverters to redirect water away from the foundation.

    5. Sprinklers and plants watering recommendation:
    We recommend when watering plants and lawn to make sure that you direct lawn sprinklers so they do not wet the siding, windows, or foundation walls, sprinkles spray water upwards which can easily penetrate inside of the walls creating a moisture condition that can lead to mold and rot

    6. Landscaping:
    Trim plant life away from the siding as needed.
    Provide consultation and cost for shrubs or vegetation that may need to be moved if foliage persistently contacts siding, windows, or utility penetrations such as dryer vents.

    Interior

    7. Attic:
    Check for water stains on the underside of the roof, rusted nails and discolored mildewed sections on any surface. If we find any of these moisture warning signs we will look for the source of the moisture. (These could be from water leaks or a faulty ventilation fan that is directing moist air into the attic space instead of to the outside)
    Check that vents at the eaves are unobstructed by insulation and that there is room for air to flow from the eaves (soffit vents) into the attic space and out the upper roof vents.
    After the throughout inspection we will provide consultation and cost of repairs if needed

    8. Ventilation:
    We recommend that fans run for 20 minutes after showers.
    We will inspect your bath/kitchen/laundry fan ducts and dryer vent to make sure that they venting outside and they do not leak or terminate in the attic.
    Provide consultation and cost if corrections needed

    9. Kitchen/Bath:
    Inspect plumbing fixtures, paying particular attention to areas under sinks and toilets and around shower and tub enclosures.
    Look for stains, cracks, and mold on caulk or any other surface.
    Provide consultation and cost if corrections needed

    10. Basement/Crawl space:
    Check basement and crawlspace for moisture problems such as standing water, mildew on floor joists, or rust on metal fasteners.
    Check for missing batt insulation and vapor barrier over exposed ground in crawlspace.
    If we find moisture damage or standing water in either the crawlspace or basement we will provide a consultation and a cost for repairs to eliminate the source of the moisture.

    Total Price: $617.19 USD

    Approximate Completion Time: 8:20 Hours

    • Moisture & mold prevention (10 point moisture & mold prevention plan)
      $617.19 USD
    • Selected Options

    Technical Materials:Read More


    Add Comment

    We can match you with pros for this job

    Let us introduce you to some great pros we know
    Fixed
    Hourly Rates
    Live Online
    Scheduling
    100%
    Satisfaction Guarantee

    Subscribe to our Newsletter

    We're here to help. Check out our FAQs, send us an email or call us at 1 (800) 555-5555

    COMPANY

    • About Us
    • All Services
    • Blog
    • Terms Of Services
    • Privacy Policy
    • Warranty

    DISCOVER

    • Faq
    • About Us
    • All Services
    • Privacy Policy
    • Terms Of Services
    • Warranty

    PRO CENTER

    • Become a Pro
    • How it works
    • Contact Us

    Contact Us

    Handyman Pros Services Mundelein, IL
    Phone: 847-726-1061
    Email: handyman@handymanproservices.com
    © 2023 Handyman Pro Services. All rights reserved.
    WARNING
    SEARCH

      Search for: ie Caulk, drywall, grout, paint, shelving, faucet, fan, lighting, etc.

      CART
      View Cart
      • The cart is empty.
      How Handyman Pros Works
      Custom Services

      Customer name the price custom described projects are accepted on a fairly price based offer and skill level requests. We will let you know if there are any discrepancies after submitting your project within 24 hours.

      Remodeling products - How it works :

      All Products Include the product, taxes, delivery to your home and proffesional installation.

      We have compared and picked a limited number of the "Best Budget" and "Best Overall" mainstream products so you don't have to shift through a myriad of products and try deciding what's best, select a product that best fit your need and a rep will consult with you on all other product options before we proceed finalizing your work order.

      Features
      Customer to supply:

      Custome saves money by supplying as many materials, parts and fixtures as possible for the project per the "Customer to supply" list above. Some additional technical materials may also be needed for your project that we might need to supply. If needed, these materials are charged as follows: store bought materials are charged based on store receipt plus 20% mark up and, depending on distance, a delivery charge. Truck stock items are charged a 20% mark up with no delivery charge.

      Technical Materials:

      Some minor technical materials may also be needed for your project that we might need to supply. If needed, these materials are charged as follows: store bought materials are charged base on store receipt plus 20% mark up and, depending on distance, a delivery charge. Truck stock items are charged a 20% mark up with no delivery charge.

      Customize Your Service
      Enter the $ amount you want to pay $ + Mat

      Upload Pictures (Optional)


      Custom Services

      Customer name the price custom described projects are accepted on a fairly price based offer and skill level requests. We will let you know if there are any discrepancies after submitting your project within 24 hours.